Outside Industrial Sensor
Industrial Automatic Door Sensor
Opening, area surveillance and safety sensor for industrial doors
Opening, area surveillance and safety sensor for industrial doors
The LZR®-WIDESCAN sensor uses laser technology, based on analysis of time of flight. By generating 7 tilted laser curtains, the sensor creates a volumetric area in front of the door. One device can carry out 3 functions: opening the door, areas surveillance and safety. More than just a sensor, it improves the comfort and safety of the users and increases the protection of the door.The sensor is easy to install thanks to an intuitive app.
Volumetric coverage
Thanks to the precise distance measurement of the laser technology, the sensor generates a 3D detection field, which enables the exact calculation of object dimensions, speed and direction.
Door protection
The LZR®-WIDESCAN becomes your doorkeeper and protects your investment. It detects approaching or parked vehicles accurately in order to prevent any contact with the door.
Energy savings
The object profiling enables filtering out parallel traffic, ignoring pedestrians and optimizing the opening height of the door if desired. Furthermore, the virtual pull cord can be used for intentional activation. Therefore the door only opens when needed.
Independent of floor and environmentThe laser technology offers a high level of independence when confronted with weather conditions such as rain, snow, fog, etc.
Product Specification
Model: LZR-WIDESCAN
Technology: LASER scanner, time-of-flight measurement (7 laser curtains)
Max. detection field:
• Width: 1 x mounting height
• Depth: 1 x mounting height
• Typ. mounting height: 2 -10 m. (
Emission characteristics:
• IR LASER: Wavelength 905 nm; max. output pulse power 25 W; Class 1
• Visible LASER: Wavelength 635 nm; output power <1 mW; Class 2
Supply voltage:
12V AC (-10%) - 24V AC (+10%) (50-60Hz) ; 12V DC (-10%) - 30V DC @sensor terminal
Power consumption:
• heating off: < 2.5 W
• heating auto: typ. < 10 W, max. 15 W
• Response time: Typ. 230 ms; max. 800 ms (depending on immunity settings)
Out put:
• 2 solid-state relays (galvanic isolation - polarity free)
24V AC / 30V DC (max. switching voltage) - 100 mA (max. switching current)
- in switching mode: NO/NC
- in frequency mode: pulsed signal (f= 100 Hz +/- 10%)
1 electro-mechanic relay (galvanic isolation - polarity free)
30V AC / 42V DC (max. switching voltage) - 500 mA (max. switching current)
• Test input: 30V DC (max. switching voltage) - low > 1V, high > 10V (voltage threshold)
• Dimensions: 159 mm (H) x 208 mm (W) x 127 mm (D) (approx.)
• Material / Colour: PC/ASA - Black
• Protection degree: IP65
• Temperature range: -30 °C ~ +60 °C
• Vibrations: < 2 G
• Conformity:
EN 61000-6-2; EN 61000-6-3; EN 60950-1; EN 60825-1; EN 50581
Control sensor settings via application
Opening sensor for industrial doors
Opening sensor for industrial doors
The FALCON is a unidirectional motion sensor optimizing the performance of automatic doors. The FALCON detects every type of target and can filter people. Detecting vehicles only allows to reduce the door closing cycle by rejecting cross-traffic. Mounted at 7 m the FALCON has a detection field of 4 x 5 m. At 3.5 m, the FALCON XL detects in an area of 4 x 2 m.
PERFORMANCE
• Unidirectional motion detection for an optimum door closing cycle generating energy savings.
• Possibility of filtering people and detecting vehicles only.
• Possibility of filtering cross-traffic to eliminate unwanted detection.
• Immunity and stability thanks to the BEA planar antenna and the digital treatment of the signal.
• Sensor performance and precision depend on mounting height: FALCON with 9-patch antenna for mounting till 7 m. FALCON XL with 3-patch antenna for mounting till 3.5 m.
Product Specification
Model: FALCON
Mounting height: FALCON: 3.5 m - 7m; FALCON XL: 2 m - 3.5 m
Transmitter frequency: 24.150 GHz
Detection mode: motion
Tilt angles: 0° to 180° vertical
Detection zone: FALCON: FALCON: 4 x 5 m ; FALCON XL: 4 x 2 m (typical at 30° and fi eld size 9)
Supply voltage: 12V to 24V AC ±10%; 12V to 24V DC +30% / -10%
Reaction time: 100 ms
Min. detection speed: 5 cm/s (Measured in optimal conditions)
Mains frequency: 50 to 60 Hz
Temperature range: -30°C ~ +60°C
Max power consumption: <2w
Degree of protection: IP65
dimension (LxHxW): 12.7 x 10.2 x 9.6 cm
FALCON Sensor
Opening Sensor for Industrial
Microwave Radar Sensor for Industrial Facilities.
฿6,400
Please add me as a friend so we can communicate via LINE. @hammerautodoor
Motion & presence sensor for industrial doors
Motion & presence sensor for industrial doors
The CONDOR has a microwave motion detector and an active infrared presence sensor built in the same housing. The microwave FALCON-type planar antenna stands for a comfortable activation quality. The signal treatment results in an accurate precision to filter out pedestrians, cross-traffic and possible interferences. The active infrared technology offers a presence area where every vehicle and object standing still close to the door will be detected.
Features
Recommended for best performances
Comfortable opening (microwave)
Special Features
Protection of the door (infrared)
Quick installation
Capacity to filter pedestrian and cross traffic
Features
• The approach detection can be easily adjusted according to the environment.
• The home-made planar antenna features an accurate pedestrian/ vehicle filtering and a reliable cross-traffic rejection.
• The home-made planar antenna features an accurate pedestrian/ vehicle filtering and a reliable cross-traffic rejection.
• This detection area allows to decrease the door timer: it offers energy savings proportional to the number of door closing cycles.
• The CONDOR stands for an alternative solution to induction loops with a faster installation and service.
Product Specification
Model: CONDOR
Technology: Microwave doppler radar
Detection mode: Motion & presence
Transmitter frequency/wavelength:
• Microwave: 24.150 GHz
• Infrared: 875 nm
Transmitter power density:
• Microwave: < 5 mW/cm²
• Infrared: < 250 mW/m²
Detection field:
• CONDOR: 4 × 5 m.* / 4 × 4 m. (Signal transmission point**)
• CONDOR XL: 4 × 2 m.* / 4 × 4 m. (Signal transmission point**)
Reaction time:
• CONDOR: 100 ms
• CONDOR XL: 250 ms
Min. detection speed:
• 5 cm/s to activate a detection
Tilt angle:
• -8° - 22° (relative to sensor front face)
• 15° - 45°
Supply voltage:
• 12V to 24V AC ±10%
• 12V to 24V DC +10% / -3%
Mains frequency: 50 to 60 Hz
Power consumption: < 3.5 W/VA
Output :
• 2 relays (free of potential change-over contact)
-
Max. contact voltage: 42V AC/DC
-
Max. contact current : 1A (résistif)
-
Max. switching power: 30 W (DC) / 48 VA (AC)
Output holdtime: 0.5 s
Temperature range: -30°C - +60°C
Cable length: 10 m.
Mounting height:
• CONDOR: 3.5 – 6 m. (depending on size and nature of the target))
• CONDOR XL: 2 – 3.5 m. (depending on size and nature of the target))
Dimensions (LxHxW): 127×102 × 96 mm.
Degree of protection: IP65
Humidity: 0–95% non condensing
Materials: ABS/Polycarbonate (Colour: black/smoked purple
Norm conformity:
EMC: 2004/108/EC
R&TTE: 1999/5/EC
MOTION AND PRESENCE SENSOR FOR AUTOMATIC INDUSTRIAL DOORS
Opening and presence sensor for automatic industrial doorsThe IXIO-D INDUS combines two technologies – radar and infrared – to achieve a double goal: opening and protection. The IXIO-D INDUS protects automatic doors as well as those operating them.
The IXIO-D INDUS radar senses any approaching movement towards the door, while the infrared technology senses the presence of people and objects in the area around the closing zone of the door.
PROTECTING THE DOOR
The radar monitors a large, adjustable area. Its responsiveness makes it ideal for opening and re-opening the door for fork-lift trucks and vehicle traffic. In this way, it helps to prevent the vehicles from colliding into the door, when approaching at a reasonable speed.
PROTECTING USERS
Two curtains of 24 (48 total), high-density infrared spots provide precise presence detection near the threshold area. Provided on both sides of the door, this additional volumetric protection reduces the door’s hold-time and therefore reduces the opening and closing time of the door.
POSITION OF THE CURTAINS
Four infrared spots, visible on the floor, appear during configuration. This means that the position of the first curtain is easy to adjust.
LCD SCREEN
Intuitive setup via the LCD screen with text and symbol display (LCD graphics).
Product Specification
Model: IXIO-D INDUS
• Technology: Microwave doppler radar
• Transmitter frequency:: 24.150 GHz
• Transmitter radiated power: < 20 dBm EIRP
• Transmitter power density: < 5 mW/cm²
Active infrared with background analysis
• Spot: 5×5 cm. (typ)
• Number of spots: max. 24 per curtain
• Number of curtains: 2
• Detection mode: Motion / Presence
• Detection field: 4.5×2.5 m.* or 3.5×0.5 m.*
• Tilt angle: 15° - 45° / -7° +4° (adjustable)
• Output : Solid-state-relay (potential and polarity free)
• Max. contact current: 100 mA
• Max. contact voltage: 42 V AC/DC
• Hold time output signal:
• from 0.5 s to 9 s (adjustable)
• from 0.3 s to 1 s (not adjustable)
• Min. detection speed/ Typical response time: 5 cm/s
< 200 ms (max. 500 ms)
• LED signals: Green / Red
• Mains frequency: 50 to 60 Hz
• Supply voltage: 12V - 24V AC ±10% / 12V - 30V DC -5%/+10%
(to be operated from SELV compatible power supplies only)
• Mounting height: 2 m to 4 m **
Dimensions: 269.3 mm (L) × 57.3 mm (H) × 57.9 mm (W)
Materials/colour: ABS + LURAN S/ Black or white
• Temperature range: --25°C to +55°C; 0-95% relative humidity, non condensing
• Protection degree: IP54
• Norm conformity: R&TTE 1999/5/EC; LVD 2006/95/EC;
RoHS 2 2011/65/EU
Inside Industrial Sensor
Industrial Automatic Door Sensor
OPENING AND SAFETY COMBINE IN ONE SENSOR
OPENING AND SAFETY COMBINE IN ONE SENSOR
ZENSAFE is an entry level 2 in 1 sensor solution combining a bidirectional radar sensor for the opening and 1 curtain with infrared spots for safety.
FEATURES
• Opening and safety in one sensor.
• Bidirectional sensing detection offering a reliable and comfortable opening
• 1 safety curtain with 24 active infrared spots.
• Robust and elegant design
• Easy to install.
• The angle of infrared curtain can adjust easily.
Product Specification
Model: ZENSAFE
• Transmitter frequency: 24.150 GHZ
• Transmitter radiated power: < 20 dBm EIRP
• Transmitter power density: < 5 mW/cm²
• Detection mode: Motion and Presence
• Supply voltage: 12 V - 24 V AC+/-10%, 12 V - 30 V DC,
-5% / +10%
• Mains frequency: 50 to 60 Hz
• Max. power consumption: < 3 W (VA)
• Temperature range from: from -25º C to +55º C
• Mounting height from: from 1.8 m to 3 m
• Material: ABS
• Weight: 215 g
• Cable lenght: 2.5 m
Radar & Active Infrared
Safety Sensor for Automatic Doors IXIO-D EN16005 Standard
The IXIO-D is a hybrid technology sensor designed for the activation and protection of automatic sliding doors worldwide since 2012. Powered by Artek Inside, it delivers a smooth and convenient door-opening experience, featuring an infrared curtain that helps prevent direct contact between users and the door. The IXIO-D ensures safety at the leading edge and threshold of the door during closing. When used in conjunction with the IXIO-S, which provides safety during opening, it forms a complete solution for sliding doors that complies with both EN 16005 and DIN 18650 safety standards.
Comfortable opening
Artek inside, developed and produced by BEA, takes radar technology to the next level. It inherits the stability and reliability of our radar sensors, opening doors only when needed.
Reliable safety
The tridimensional infrared field is composed of high-density infrared curtains, protecting users from any contact with the doors. The f lexible infrared field can be adapted to all types of sliding doors and is stable in all surroundings and weather conditions.
Energy savings
Rejection of cross-traffic is optimized to reduce unwanted opening caused by passing pedestrians. Thanks to the unidirectionality of the radar field, the door also closes sooner for even more energy efficiency.
Intuitive installation
Thanks to the multilingual LCD screen, configuration of the sensor is a matter of a few clicks. The angle of the infrared curtain can be easily adjusted with the help of 4 visible spots.
Product Specification
Model: IXIO-D ARTEK (EN16005/DIN 18650)
• Technology: Microwave doppler radar Active infrared with background analysis
• Mounting height: 2 m. to 3.5 m.
• Power Consumption: < 2.5 W
• Noise: < 70 dB
• Transmitter frequency: 24.125 GHz
• Transmitter radiated power: < 20 dBm EIRP
• dBm EIRP Transmitter power density: < 5 mW/cm²
• Detection Mode: Motion, Presence
• Min. detection speed: 5 cm/s
• Supply voltage: 12 V - 24 V AC ±10% (50 - 60 Hz);
12 V - 30 V DC ±10%
• Degree of protection: IP54 (Standard IEC/EN 60529)
• Temperature range: -25°C to +55°C
relative humidity, non condensing
Microwave Sensor
UNIVERSAL OPENING SENSOR FOR AUTOMATIC DOORS
The EAGLE ARTEK is a microwave sensor that can be installed on all types of automatic doors, regardless of the environment. Slim and compact, it is designed to fit the most discreet door operating systems. It offers one-way opening and optimises door opening and closing cycles. Setting the parameters is flexible and easy using push buttons. The detection field can be adjusted very simply without changing the antenna manually, as everything is handled electronically.
Max. detection range
Wide: 4 x 2 m
Narrow : 2 m x 2.2 m @2.2 m high
Stability & reliability
The EAGLE ARTEK benefits from ARTEK radar technology developed by BEA. Based on the performance of EAGLE ONE, this antenna inherits the stability and flexibility of our radar sensors.
Compact design
EAGLE ARTEK's slim lines and compact dimensions permit discreet integration with all types of operating systems, even the thinnest ones. Because it uses the same installation references as the EAGLE ONE, the EAGLE ARTEK can easily replace an existing installation.
Flexibility
The EAGLE ARTEK offers full electronic management of the radar field. You no longer need to change the antenna to adjust the detection field; shape and size can be quickly adapted using push buttons.
Optimization of cross traffic rejection
Thanks to the improvement of cross traffic rejection, the EAGLE ARTEK better filters out parallel movements at the door that can cause unwanted detections.
Double swing door
Cross traffic rejection
Revolving door
Product Specification
Model: EAGLE ARTEK
• Technology: Microwave
• Transmitter frequency: 24.125 GHz
• Transmitter power density: < 5 mW/cm²
• Detection mode: Motion
• Minimum detection speed: 5 cm/s
• Supply voltage**: 12V to 24V AC ±10%; (50 to 60 Hz )
12V to 24V DC +30% / -10%
• AC frequency: 50 to 60 Hz
• Max. power consumption: < 1 W
• Mounting height: from 1.8 m to 4 m
• Degree of protection: IP54
• Temperature range: -20°C to +55°C
• Dimensions: 120 mm (W) x 50 mm (H) x 50 mm (D)
Infrared Sensor
MOTION & PRESENCE IN ONE SENSOR
SAFE 4 is a sensor providing Motion & Presence detection function, with 4 IR-Curtain, which contains 24 infrared spots. It is especially used for safety and opening of sliding doors.
FEATURES
• Visible infrared spots help to confirm the position of the curtain.
• Motion or Motion & Presence mode to selectable.
• 4 curtains with 24 or 16 active infrared spots.
• The angle of infrared curtain is easy to adjust.
• Easy to install.
• Robust and elegant design.
SAFE 4 is compatible with:
• Sliding doors
• Curved doors
Product Specification
Model: SAFE 4
• Technology: Active infrared
• Supply voltage: 12V - 24V AC +/-10%
• Power consumption: <2.5W
• Mounting height: From 1.8 m to 3 m
• Angle adjustable range: 18.5° ( the angle of 4 curtains change at the same time)
• Hold time output signal: 500ms
• Temperature range: -20°C ~ +60°C
• Degree of protection: IP54